How to Wear a Cardboard Face Mask with Tabs and Elastic

Quick answer

To wear a cardboard face mask with tabs and elastic, punch out the tabs, attach the elastic to the back, and adjust it to fit snugly but comfortably. Follow the step-by-step guide below for a secure fit.

How to wear your cardboard face mask

1. Punch out the tabs: Carefully push out the pre-cut tabs on the sides of the mask. Do not tear the cardboard; use gentle pressure. If tabs are stubborn, use a pencil eraser to push them out. Check that both tabs are fully detached before moving on.
2. Attach the elastic: Thread each end of the elastic through the holes left by the tabs. Tie a knot on the outside of each hole, or loop the elastic and secure with a knot. Ensure the elastic is not twisted. Make sure the knots are tight enough that the elastic won't slip through during wear.
3. Adjust the fit: Place the mask on your face. The elastic should go around your head, not your ears. Adjust the length by tying a small knot in the elastic at the back. Aim for a snug but comfortable fit—you should be able to slide a finger under the elastic. If the mask feels too tight or too loose, adjust the knot before wearing it for extended periods.
4. Wear and check: Once the mask is on, move your head and talk to test stability. The mask should stay in place without slipping. If it shifts, tighten the elastic slightly or reposition the mask higher on your nose. Re-check the fit after 15 minutes of wear, as elastics can stretch.

Product facts

• CM244 Robbie Williams Mask CELEBRITY MASKS Single Face Mask: This mask comes with tabs and elastics for easy self assembly. You don't need extra tools or materials to get a secure fit—just follow the assembly steps.